Home-immediately access 800+ free online publications. Download CD3WD (680 Megabytes) and distribute it to the 3rd World. CD3WD is a 3rd World Development private-sector initiative, mastered by Software Developer Alex Weir and hosted by GNUveau_Networks (From globally distributed organizations, to supercomputers, to a small home server, if it's Linux, we know it.)ar.cn.de.en.es.fr.id.it.ph.po.ru.sw

CLOSE THIS BOOKWorking with Presses - Course: Mechanical woodworking techniques.Trainees' handbook of lessons (Institut fr Berufliche Entwicklung, 16 p.)
VIEW THE DOCUMENT(introduction...)
VIEW THE DOCUMENT1. The Purpose of Working with a Press
VIEW THE DOCUMENT2. The Construction of a Press
3. Technological Application of the Press
VIEW THE DOCUMENT4. Labour Safety with the Spindle Presses

4. Labour Safety with the Spindle Presses

When operating the spindle press it carries out only slow motions. That is why there are no accident hazards resulting from the driving parts of the machine.

However faulty handling of the clamp lever and the spindle controlling unit can lead to accidents.

The press is closed and opened with strong man power. If the clamping strength of the clamp lever stops suddenly the operating person comes to fall. On the press stand or other objects you can be injured seriously. That is why you always shall pay attention to the right sitting of the clamp lever in the lever lead. Before you exert pressure you have to check that the notch pawl has locked in the notch wheel (visual inspection).

Hardened urea-formaldehyde glue forms very sharp edges. There is a hazard of getting injured when unclamping, so please do it carefully. It is not permitted to use an additional clamp lever prolongation. Otherwise the press can be damaged because of overloading.

TO PREVIOUS SECTION OF BOOK